Repair Index
| Click on any picture to see a larger version. | ||
| Venetian Blinds | Venetian Blinds can be fitted in the recess of the window. Measure the width at the top and the bottom of the opening. If there is a difference in the measurement use the smaller one. Measurements should allow for clearance of about 9mm(3/8 in) at each end. Screw the brackets in place so that the blind when hanging, will clear any brackets or handles. Set the end brackets 75mm (3in) in from the end of the head rail, mount the head rail in the brackets, some simply clamp others lock into place with a swivel catch on each bracket. First raise and lower the blinds to check that the mechanism is working freely to lower the blind pull the cord across the front of the blind to release the lock mechanism then let it slide through your hand tilt the slats by rotating the control wand or pulling the cord at the other end if a control wand is not fitted. |  |
Copyright © 2002 Simplychangeit.com, Simplychangeit.co.uk, Simplychangeit.info All rights reserved
For More information about this website email me at webmaster
Simply
Change It Disclaimer
The authors of this web site accept no liability for damage or injury arising from the use of information contained on these pages.Always ensure you have the necessary tools to undertake the task and only attempt DIY if you are confident you have the necessary skills to complete the work. If not hire a professional tradesman to carry out the work. Always read the instructions that come with materials or equipment. Check and double check measurements. Use safety equipment e.g. goggles, ear defenders and protective clothing as necessary, especially when operating power tools. Always check before cutting and drilling for hidden pipes and cables. and finally. TAKE CARE WITH WHAT YOU ARE DOING. This site is design for UK standards no allowances for national or regional variations has been taken into account.
The authors of this web site accept no liability for damage or injury arising from the use of information contained on these pages.Always ensure you have the necessary tools to undertake the task and only attempt DIY if you are confident you have the necessary skills to complete the work. If not hire a professional tradesman to carry out the work. Always read the instructions that come with materials or equipment. Check and double check measurements. Use safety equipment e.g. goggles, ear defenders and protective clothing as necessary, especially when operating power tools. Always check before cutting and drilling for hidden pipes and cables. and finally. TAKE CARE WITH WHAT YOU ARE DOING. This site is design for UK standards no allowances for national or regional variations has been taken into account.
Copyright 2002 All Rights Reserved